08165312322, 08182677240, 08165312322
hello@myproject.com.ng

STRUCTURAL DETAILING OF A SINGLE STORY RESIDENTIAL BUILDING WITH RETAINING IN ALL

 3,000

PROJECT INFORMATION

AVAILABILITY

24 HOURS DELIVERY

CHAPTERS

CHAPTER 1 – 5

FORMAT

MS WORD, PDF

PAGES

55

REFERENCES

YES

Sold By: myProject
SKU: CIVENG07 Category: Tag:

Download the Complete (Chapter 1-5)  for the project topic and material titled STRUCTURAL DETAILING OF A SINGLE STORY RESIDENTIAL BUILDING WITH RETAINING IN ALL here on myproject.com.ng. See the above for the project information. Click the GET PROJECT NOW button to get the full project material immediately.

PREFACE

This project is mainly concerned with the presentation of information basically on the structural detailing of reinforced concrete members of a story building, in a sloppy land with a retaining wall.  Structural detailing is a branch of structural work that transposes the idea of works of a structural engineer into working drawings for easier utilization in the building construction.  Working drawings are drawings produced by engineers for easy execution of a plan by builders.

The drawing also shows the interrelationship between the architectural and the engineering design, it shows all the construction detail properly as they relate to the other with no attempt of separation of diverse materials.

TABLE OF CONTENTS

CHAPTER ONE

Introduction of Project

CHAPTER TWO

2.0    Detailing process

2.1       Reinforcement size

2.2       Notation of drawing

2.3       Identification of bars

2.4       Bar bending schedule

2.5       Type of drawing

2.6       Profile drawing and reinforcement drawing

2.7       Detailed drawing

2.8       Drawing size, and margin and panels

2.9       Thickness of line lettering and sapling

2.10     Dimension and scales

2.11     Plan, elevation, section, grid lines

2.12     Equipment

CHAPTER THREE

3.0    Retaining wall

3.1       Small height retaining wall

3.2       Cantilever retaining wall

3.3       Retaining wall for basement

CHAPTER FOUR

4.0     Engineering specification

4.1       Floor slab and beam and staircase

CHAPTER FIVE

5.0      Detail of the element

5.1       Foundation column

5.2       Kicker and beam

5.3       Slab

5.4       Stair case

Bibliography

 CHAPTER ONE

INTRODUCTION

         There is only one means by which information is transfer to a contractor in a construction industry, designers in the engineering sector communicate to each order by means of drawing and specification.  Before any construction work could be done properly, there must be an engineering drawing mostly done by architecture in connection with the design being provide by the structural engineer.

It is the work of a structural engineer to design an object such as bridges, railways, dams, roads, buildings and so on.   The design comes up in the hand sketch first after which the design are put together into a clear and presented working drawing used by builders or contractors often taken to the authority involve for approval.

The drawing will show the interrelationship of all the parks that go together to make the ground design drawing.  All the general construction details are shown properly as they relate to the other with no attempt of separation of diverse materials.

A good drawing should provide the following information.

  1. Overall dimension
  2. Interrelationship of material, equipment and the space schedule of finishes
  3. Doors and windows type and sizes

All detailing works developed by the detailer serves a good purpose of standing the risk of sudden of buildings.  It also helps to avoid unnecessary delay of work, which may come up doubts and frequent clarification.

Additional information

AVAILABILITY

24 HOURS DELIVERY

CHAPTERS

CHAPTER 1 – 5

FORMAT

MS WORD, PDF

PAGES

55

REFERENCES

YES

Not the topic you are looking for? Search here




Choose what you want by category

PROJECT TOPICSHIRE A WRITER
CUSTOMIZED ESSAYFREE ONLINE COURSES
MAKE PAYMENT(S)DOWNLOAD PROJECT(S)





Need Help? Chat with us